you need to keep your transoms like they were new if you go with i/o other wise you run into problems with gimbals not fitting. a standard transom is about 2 3/8s or so. as a standard, I have to fill 4'' on my transom on the saber and was going to use a plate also, but konrad said it will not work for my set up. I am going with a konrad ace xfactor drive with ex box going to sell the baja as project boat it gave me 19 yrs of some azz kicking fun. now its SABER time with a DEAN GELLNER 572:coolcowboy:

Gotcha thanks, I know all about the proper thickness need in the transom to keep everything happy. Should be going to my buddys shop tomm to start on the boat if it doesnt rain or snow for that mater. Good luck with your project.
Erik

Dude I'm going to start charging you storage.a little motavatoin of a finished product.

Yeah well you better watch out next season as I skate right by you! :party-smiley-004:
Oh yeah that is one nice looking tri axle trailer...

I know i will have it under my boat tomorrow.:lolhit:

Ok if iam able to use your boat this coming summer :eek:

Well not much of a update since the holidays and all but the inside fiberglass work is done, now its time to work on the outside of the transom!
Thanks to Robert (excalibur82), John (johnlx302) and Dominic for the much need help!

Only pics
http://i126.photobucket.com/albums/p...6/PC270005.jpg

http://i126.photobucket.com/albums/p...6/PC270006.jpg

Nice job...looks good.

Erik, i'm available if you need an extra hand.

Dude I still fell stoned from the fumes.....