Trs and x dimension
#1
Registered
Thread Starter
Join Date: May 2011
Location: Key largo, fl
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Trs and x dimension
What are u guys running the trs x dimension at on the 27 Excalibur and what was it from the factory! Gonna be setting one up here soon and was wondering gonna be decent power and only thing that matters is topend!
#4
Registered
VIP Member
I would convert it to a bravo. Did it to mine and ran awesome. I set the drive at 19inches with a 540 and a bravo it ran 85/87 all the time and never broke a drive. Motor made 640 ish hp. When I did The transom The old wood had 19.5 inches written on the back. That was what the set it at the factory.
#5
Registered
Thread Starter
Join Date: May 2011
Location: Key largo, fl
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
i know the bravo is faster and if I'm careful it won't break but i like the peace of mind of the tranny but my dad keeps telling me the same thing about the bravo setup! who knows still have a lot to do before we get down to absolutely needing to make the decision! thanks guys for all the responses