Wellby

I have a '85 27 Speedster. It is very sensitive to side winds or even strong breezes as I'm heading across the lake. I am constantly adjusting my tabs to keep the boat level. Is it because the beam is so narrow? Does anybody else have this problem?

TxHawk

iTrader: (2)

I have a 27' Speedster i am working on now. It never stays level. I just quit adjusting the tabs and leave them flat. I just ride the lean out. It also leans over when you get on the throttle hard. The beam makes them very sensitive.

FASTTIMES

Excal40- did you end up buying your buddies? got any pics

TxHawk

iTrader: (2)

No, im just working on it. Trying to get a little mire out of the motor thats in it, doing some ignition updates etc.

Wellby

Well, I'm glad to see I'm not losing my mind.

JUSTONCE

my 24 is awfull. The thing lists if I eat a smaller lunch than my passenger. I don't mind it but in big water it makes for hard landings that are very tough on the hull. I've found with this boat that quartering waves is impossible(unless you want to bang every wave with the side of the hull), I just adjust my course to hit them square or roll across them. Is this how your boat acts also?

Wellby

That sounds like mine. I have to adjust where the cooler sits according to who is riding with me. Quartering is'nt too bad, if I'm not going very far(2-3ft. chop). I'm not in big water. Most of the time it's head on or rolling with.

JUSTONCE

Your lucky, out on lake Erie you'll get into this washing machine chop 4-5' and it kicks the poor boat side to side so hard that its not uncommon for my rubrails to be underwater when running hard.

Wellby

Daaauuum! And you're in a 24'?! That's gotta beat the crap out of you.

FWK

Mine has that problem but not to the extreme that I have to keep adjusting the tabs.