how to clean rub rail????
How do you get the black marks off your white rub rail?
|
Re: how to clean rub rail????
I think Acetone ....someone will chime in ....but ONLY on the rubrail ....
|
Re: how to clean rub rail????
Originally Posted by offthefront
I think Acetone ....someone will chime in ....but ONLY on the rubrail ....
|
Re: how to clean rub rail????
wipe on and off? I tried thinner and it didn't work.
|
Re: how to clean rub rail????
just put some acetone on a clean rag and drag it across with some elbow grease. may have to go over it serveral times if its really marked up. it evaporates pretty fast.
|
Re: how to clean rub rail????
S.O.S. pad only on the rail though be careful works great
|
Re: how to clean rub rail????
Used the acetone on my old rubrail insert with fair results. Don't soak the rag, just damp, then work fast. Soaking it will make the insert soft. Try to keep off the molding. But I did use a rag at times heavy with acetone to rub out scratches in the molding. It softens the plastic enough that you can rub across the scratches until it 'melts' smooth. I did notice that the insert got dirtier faster and easier and lost the shine after using acetone. Ended up replacing the insert with a new one and no longer use acetone. Black streak remover or bleach white only now.
|
Re: how to clean rub rail????
my rub rail is one piece hard rubber.
|
Re: how to clean rub rail????
acetone
|
Re: how to clean rub rail????
What happens if you get acetone on gel coat???
|
All times are GMT -5. The time now is 08:55 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.