How To Kill A Saturday
#1
Registered
Thread Starter
How To Kill A Saturday
Take 4 old Crummy valve covers
DA them using 220 grit
Then red scotch brite them.
Clean them good with Prep sol
prime any bear spots.
DA them using 220 grit
Then red scotch brite them.
Clean them good with Prep sol
prime any bear spots.
#2
Registered
Thread Starter
Re: How To Kill A Saturday
These are the covers that are going on my motors.
Now with all the tape and shapes still stuck on covers
I completely paint the covers.
Now with all the tape and shapes still stuck on covers
I completely paint the covers.
#3
Registered
Thread Starter
Re: How To Kill A Saturday
I Whack it with two coats of clear.
Now I will go drink some beer
Now I will go drink some beer
#4
Re: How To Kill A Saturday
looks good, keep the pics coming.its funny i make my living working on other peoples boats yet i still enjoy working on my own.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#7
Registered
Thread Starter
Re: How To Kill A Saturday
Originally Posted by ratman
gerry step away from the laquer thinner.lol
Thread
Thread Starter
Forum
Replies
Last Post
Dean Ferry
General Boating Discussion
14
02-08-2002 09:04 AM