transom filling
#1
Registered
Thread Starter
Join Date: May 2003
Location: horseheads, ny
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
transom filling
I have a boat with a transom that was cut for a number 5 drive we need to glass it in and recut it for XR bravo. Does anyone here have any pics of a job like this? Can we just build a plug the same thickness of the transom and glass it in or do we need to cut away part of the transom and replace it?
thanks
Scott
thanks
Scott
#2
Re: transom filling
you will have to be very careful with this one. if the bravo cut out is going to be completly inside the old #5 cut out area than you are going to need to shelf in your transom plug. if you need a complete run down on how to do this feel free to give me a call and i will explain it as best i can. alittle to much to wright here
Dave 419-461-1484
Dave 419-461-1484
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#3
Registered
Thread Starter
Join Date: May 2003
Location: horseheads, ny
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Re: transom filling
thanks for the reply Iam sure I will be giving you a call in the next few weeks when I start the work. I have a pretty good Idea of what you mean by shelfing it in but I will give you a call before I start have a good christmas
thanx
Scott
thanx
Scott