Removing bow lights?
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Gorham, Maine
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Removing bow lights?
Can you take out bow lights and re glass the holes so that you would never know they are there? If so, who could be recomended to do this? Any idea on how much something like this would cost?
Thanks.
Thanks.
#2
Yes you most certainly can. Gel or paint either one can be seamlessly blended by an experianced shop. Just off the top of my head in my shop it would be in the fifteen hundred to two thousand range. Not sure what shops are in your area though. I assume you are talking about those big docking lights.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#3
Lakeside Restorations.com
Commercial Member
We do glass work. Yes they can usually be removed, however the results depend on the work and materials used. Also price would depend on materials, time, difficulty in accessing the lamps for removal in your hull (some are easier to get at than others inside the bow). Also it would depend on the exterior colors & graphics matching required.. Long story short, unless they look awful or you really really hate them, it is probably less expensive to replace them, or just leave them alone.. Hope this helps...
Jamie / Lakeside
Jamie / Lakeside
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]