Originally Posted by throttleman
(Post 3565103)
FYI, you should not use pine plywood , need to use Douglas fur or birch to do you stringers and bulk heads . pine has oils and will rot .
|
pad
2 Attachment(s)
Im going to run a 9'' pad from the transom tapering down to 0 10' long, this will give me alot more lift , less drag and put my chine reals lower for added Stability at high speeds should give me a 6 to 9 mph speed gain. hi have moved my x chine reals 5'' as well with a imco 12-3 box and a -2 speed master shorty lower. Im trying to get in to the 80s i sure ill be the with this set up next summer. I have a lot of work going on but it will pay off when its done.
|
Originally Posted by ridefast77
(Post 3565084)
actually I have lost weight, all the old foam was wet, the 2 old tanks were aluminum and the new one is plastic. I have cut off around 200lbs and the new tank being in the center makes the center of gravity more of a central and lower location. Allowing the boat to handle better.
looks and sounds like ALOT of work BIG Daddy :drink: ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!:coolcowboy: ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:drink: |
Originally Posted by RunninHotRacing163.1
(Post 3565353)
P90X :lolhit:
looks and sounds like ALOT of work BIG Daddy :drink: ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!:coolcowboy: ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:drink: |
"Look at pic 2, first post and squint a little"
Good to know us males all think alike. Lol. |
can anybody read this and please let me know
|
Originally Posted by 40gt
(Post 3566017)
"Look at pic 2, first post and squint a little"
Good to know us males all think alike. Lol. |
long day
2 Attachment(s)
well i want my motor bay to be as slick as the outside of the boat wow that was alot of work sanding but its going to look bad a**
|
Originally Posted by ridefast77
(Post 3569112)
well i want my motor bay to be as slick as the outside of the boat wow that was alot of work sanding but its going to look bad a**
i have the same job ahead of me. :eek: |
Originally Posted by vintage chromoly
(Post 3569116)
it will be worth it when it's done!
i have the same job ahead of me. :eek: Got to make i look good for that new power im going to drop in for next year. |
All times are GMT -5. The time now is 12:15 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.