epoxy hull?
10-12-2015, 08:31 PM
#11
VIP Member
yes, see my above edit . . . an it was a Fountain. Actually mid 90's to early 2000's there were a few builders trying to make it work.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 10-12-2015 at 08:34 PM.
10-12-2015, 08:37 PM
#13
Registered
When I was up in the Outerbanks in 94 building the big wood epoxy Sportfishermans ,I bought a 16 foot Carolina skiff that had split the outside skin down the middle about 7 feet.
being I had easy access to epoxy I repaired it with that and a week later gelcoated it.
That did not go well .The gel didn;t seem to ever cure properly where it met the epoxy.
Ended up grinding the mess off and painting it.
being I had easy access to epoxy I repaired it with that and a week later gelcoated it.
That did not go well .The gel didn;t seem to ever cure properly where it met the epoxy.
Ended up grinding the mess off and painting it.
10-12-2015, 08:41 PM
#14
theres really not a whole lot in terms of use that would differ from a poly boat. its just when you need to repair it that it needs to be addressed.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
10-12-2015, 08:46 PM
#15
Registered
Fill us in Oh Wise One.
Please
10-12-2015, 08:48 PM
#16
Registered
Thread Starter
Ill try posting a pic again although ive had no success for quite a while. [ATTACH=CONFIG]546434[/ATTACH][ATTACH=CONFIG]546434[/ATTyACH]
edit he did say you got a good one , maybe some not so much.
edit he did say you got a good one , maybe some not so much.
Last edited by buck35; 10-12-2015 at 08:53 PM.
10-12-2015, 08:56 PM
#19
Registered
Thread Starter
10-12-2015, 09:02 PM
#20
Registered
Thread Starter
