Offshoreonly.com - Exhaust Tip question??

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Formula (https://www.offshoreonly.com/forums/formula-36/)

- - Exhaust Tip question?? (https://www.offshoreonly.com/forums/formula/101555-exhaust-tip-question.html)

lonestar382

04-24-2005 10:21 PM

Exhaust Tip question??

1 Attachment(s)

I was reading through Nort's video thread and noticed the exhaust tips he has. I was wondering who makes those? I have the same setup, but my tips are flush with the transom with a black flapper instead of the angle cut tips.

offthefront

04-25-2005 05:33 AM

Re: Exhaust Tip question??

1 Attachment(s)

http://stainlessmarine.com/exhaust1.html

offthefront

04-25-2005 05:38 AM

Re: Exhaust Tip question??

there are several manufactors that make em ..... you might do better by checking with Fred Cecil @ www.trickmarine.net very knowledgable ...Also make sure you get the correct angle ...Ask Outlaw .......

Formula Outlaw

04-25-2005 07:18 AM

Re: Exhaust Tip question??

1 Attachment(s)

My two cents:

Don't waste time. Give Fred a call. Best price and best service on the Planet Earth. Double check if your existing tips have an angle on the flange or are "straight or flat". Mine are flat (no angle), like shown in the above photos and the angled flange WILL NOT work.

And there is NO flapper noise with the Stainless Marine tips.

All times are GMT -5. The time now is 04:07 PM.