what is your top speed, prop setup for 272 owners
07-22-2019, 12:09 PM
#62
Registered
Join Date: Feb 2019
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Still following this thread.
Not sure what I am doing wrong, but top speed for me at about 4200 RPMs is 51...
I do have stainless props, I believe they say Riptide on them. How do I decipher the pitch/size?
My port engine at wide open throttle, and trimmed up as much as I can without losing traction, will do about 4200 RPMs. The starboard engine will match it at half throttle, but any attempt to go further on the starboard side from that RPM results in loss of RPMs, like it is bogging down.
I am going to start with a tune up, but that part has me baffled.
Not sure what I am doing wrong, but top speed for me at about 4200 RPMs is 51...
I do have stainless props, I believe they say Riptide on them. How do I decipher the pitch/size?
My port engine at wide open throttle, and trimmed up as much as I can without losing traction, will do about 4200 RPMs. The starboard engine will match it at half throttle, but any attempt to go further on the starboard side from that RPM results in loss of RPMs, like it is bogging down.
I am going to start with a tune up, but that part has me baffled.
Last edited by The Sheikh; 07-22-2019 at 12:11 PM. Reason: spelling
