357 guys, cabin floor pics!!!
#11
Ok, I got the pictures so I post them now. If you have questions go for it. For the hatch hinges, I have both screwed on the boat. On the hatch, I only have the one on the right side of the boat, starboard I guess in english, since on the other side, the fiberglass corner is broken and non existant, so no hinge for that side.
#13
the hinges on the boat are bolted through the deck. To be able to hold the nuts, you have to take off the last vent on the back of the boat then you see them. By the inside of engine compartment the only access is by a small venting round hole where your hands probably won't go. Mines are stuck from salt water so I'll try again tonight to try send them tomorrow. Let me know for the price I may take a complete set... Thanks.
#14
here are the hinges I send you tomorrow. As I said I'm missing one. They are made out of aluminum. The top holes where the hatch was attached to are now more oval than perfect cercle. I don't have the screw or pin that was used so the hatch was moving up or down. Gonna have to find one!
#15
Thread Starter
Registered

Joined: Jan 2004
Posts: 1,848
Likes: 8
From: Jacksonville FL
Jeff-
Thanks alot for the pics, again helped me out 110%.. Send those hinges to the address i emailed you, ill get my buddy to mock you up a set at his cost, i will PM or email you with the price before i do it, it will more thna likely be about 1/2 of the price of one hinge from formula for both, thanks again man, and send them bad boys out ASAP
Steve
Thanks alot for the pics, again helped me out 110%.. Send those hinges to the address i emailed you, ill get my buddy to mock you up a set at his cost, i will PM or email you with the price before i do it, it will more thna likely be about 1/2 of the price of one hinge from formula for both, thanks again man, and send them bad boys out ASAP
Steve
#16
Originally Posted by Boomer35
Jeff-
Thanks alot for the pics, again helped me out 110%.. Send those hinges to the address i emailed you, ill get my buddy to mock you up a set at his cost, i will PM or email you with the price before i do it, it will more thna likely be about 1/2 of the price of one hinge from formula for both, thanks again man, and send them bad boys out ASAP
Steve
Thanks alot for the pics, again helped me out 110%.. Send those hinges to the address i emailed you, ill get my buddy to mock you up a set at his cost, i will PM or email you with the price before i do it, it will more thna likely be about 1/2 of the price of one hinge from formula for both, thanks again man, and send them bad boys out ASAP
Steve
might have jumped the gun ... I was thinking engine Hatch hinges ....
Last edited by offthefront; 02-12-2006 at 08:46 PM.
#17
Thread Starter
Registered

Joined: Jan 2004
Posts: 1,848
Likes: 8
From: Jacksonville FL
yes-
they are engine hatch hinges and he said he wouldnt mind making as many as he needed to, once he makes one the rest will fly, just need to pay for shipping and prolly a little extra for a weekend 12 pack
they are engine hatch hinges and he said he wouldnt mind making as many as he needed to, once he makes one the rest will fly, just need to pay for shipping and prolly a little extra for a weekend 12 pack
#18
Originally Posted by Boomer35
yes-
they are engine hatch hinges and he said he wouldnt mind making as many as he needed to, once he makes one the rest will fly, just need to pay for shipping and prolly a little extra for a weekend 12 pack
they are engine hatch hinges and he said he wouldnt mind making as many as he needed to, once he makes one the rest will fly, just need to pay for shipping and prolly a little extra for a weekend 12 pack
#19
Thread Starter
Registered

Joined: Jan 2004
Posts: 1,848
Likes: 8
From: Jacksonville FL
the guy at formula told me that the hinges havent changed in 20 something yrs, all the same for every boat,.. who would have thought, cuda may know?
#20
Originally Posted by Boomer35
Jeff-
Thanks alot for the pics, again helped me out 110%.. Send those hinges to the address i emailed you, ill get my buddy to mock you up a set at his cost, i will PM or email you with the price before i do it, it will more thna likely be about 1/2 of the price of one hinge from formula for both, thanks again man, and send them bad boys out ASAP
Steve
Thanks alot for the pics, again helped me out 110%.. Send those hinges to the address i emailed you, ill get my buddy to mock you up a set at his cost, i will PM or email you with the price before i do it, it will more thna likely be about 1/2 of the price of one hinge from formula for both, thanks again man, and send them bad boys out ASAP
Steve
Last edited by jeff32; 02-13-2006 at 03:12 PM.


