New 382 dash
03-19-2006 | 04:23 PM
#11
Thread Starter
Registered
Joined: Sep 2003
Posts: 3,029
Likes: 1
From: Toledo, Ohio/Las Vegas, NV
Re: New 382 dash
Originally Posted by 357sr1man
RedDog382..... I think it looks dam good,but tell me is the 94 or 95 dash the same. 
03-19-2006 | 08:38 PM
#13
Registered
Joined: Nov 2005
Posts: 205
Likes: 0
Re: New 382 dash
Originally Posted by RedDog382
I think they are around $700 from Formula if you can even get one. Phantom Chaos (Nort) from CA sent this extra one he had made up when he re-did his dash. I have a fabricator here who could probably make one for you off my old panel. He guessed around $250-$300 unfinished but with guage holes already cut.
I'd just need a blank. I'm thinking about getting rid of the speedo, rearranging the gauges and putting in a chart plotter. I haven't measured or figured out what gps I will use yet. It's far down the list at the moment. Can your fabricator make a blank?
Garrett
03-24-2006 | 12:44 PM
#17
Thread Starter
Registered
Joined: Sep 2003
Posts: 3,029
Likes: 1
From: Toledo, Ohio/Las Vegas, NV
Re: New 382 dash
Nort,
Just wonderng where you found the black rubber seal for the back of the dash panel you sent me. Formula or another supplier?
Also is the panel powdercoated or is it paint?
Thanks,
Chris
Just wonderng where you found the black rubber seal for the back of the dash panel you sent me. Formula or another supplier?
Also is the panel powdercoated or is it paint?
Thanks,
Chris
03-24-2006 | 02:34 PM
#18
Registered
Joined: Nov 2005
Posts: 205
Likes: 0
Re: New 382 dash
I picked up a boat mag today at lunch time. It has a new 353 on the cover. There are two guages and two LCD screens. I haven't had time to open the mag and it is in my trunk. I also forgot the name of the magazine already. 
I really like swinging needles on my dash, although I could give up the speedo. 
Garrett
I really like swinging needles on my dash, although I could give up the speedo. Garrett
03-24-2006 | 05:37 PM
#19
Thread Starter
Registered
Joined: Sep 2003
Posts: 3,029
Likes: 1
From: Toledo, Ohio/Las Vegas, NV
Re: New 382 dash
Originally Posted by FormulaM2Formula
There are two guages and two LCD screens.
I really like swinging needles on my dash, although I could give up the speedo.
Garrett
I really like swinging needles on my dash, although I could give up the speedo.
Garrett
I like the old school, too!
03-27-2006 | 11:43 AM
#20
Registered
Joined: Dec 2000
Posts: 12,746
Likes: 0
From: Bell Canyon, CA
Re: New 382 dash
Originally Posted by RedDog382
Nort,
Just wonderng where you found the black rubber seal for the back of the dash panel you sent me. Formula or another supplier?
Also is the panel powdercoated or is it paint?
Thanks,
Chris
Just wonderng where you found the black rubber seal for the back of the dash panel you sent me. Formula or another supplier?
Also is the panel powdercoated or is it paint?
Thanks,
Chris
I got it through McMaster Carr. I bought a spool of it. Do you need more? The panel is painted with baked enamel.
