flat panel tv help
05-12-2006 | 05:52 PM
#1
Thread Starter
Platinum Member
Joined: Oct 2003
Posts: 280
Likes: 5
From: Mentor Ohio
flat panel tv help
I made a custom cabinet this winter to install a sharp aquos
13" flat panel in our 1998 382. Everything was going good until I dropped a pair of scissors on the screen and cracked the lcd.
This is the same tv that formula uses on the newer 382's and I cannot find one anywhere. I even sent it back to sharp and they haven't helped me at all.
The model number is lc13sius
If anyone knows where to get a replacement for the whole tv or a new lcd screen please contact me.
Thanks
Jeff
13" flat panel in our 1998 382. Everything was going good until I dropped a pair of scissors on the screen and cracked the lcd.
This is the same tv that formula uses on the newer 382's and I cannot find one anywhere. I even sent it back to sharp and they haven't helped me at all.
The model number is lc13sius
If anyone knows where to get a replacement for the whole tv or a new lcd screen please contact me.
Thanks
Jeff
Last edited by WAGS382; 05-12-2006 at 06:17 PM.
05-12-2006 | 07:23 PM
#2
Registered
Joined: May 2004
Posts: 1,218
Likes: 2
From: Blanchard, OK
Re: flat panel tv help
05-15-2006 | 02:33 PM
#3
Guest
Posts: n/a
Re: flat panel tv help
There are a few available online but it looks like they are referbs.
I am planning to put one in ours, but it will be a Sharp 15" in the same series. I did some measuring and found that the 15" will fit just fine, and they are current and available.
http://www.sharpusa.com/products/Mod...8,1559,00.html
I am planning to put one in ours, but it will be a Sharp 15" in the same series. I did some measuring and found that the 15" will fit just fine, and they are current and available.
http://www.sharpusa.com/products/Mod...8,1559,00.html
Thread
Thread Starter
Forum
Replies
Last Post
cloudmaster_321
General Boating Discussion
3
11-17-2006 09:24 PM
