My Project F 35-7 In Classified...
 

Not That I'm really happy, I wish I had more time...But girlfriend is happy!

http://www.offshoreonly.com/esvon/page-13025.html

Re: My Project F 35-7 In Classified...
 

out of the ten views you guys had on this tread, what are your opinion?

Re: My Project F 35-7 In Classified...
 

Well, looks like a lot of work is needed. All vinyl needs replacing, hull and deck needs full wet sand and buff, Dash needs help, bilge is in need of total strip and repaint, trannies probably need rebuilding, and of course, it needs motors and drives. Then there's all the electrical gremlins and other numerous odds and ends that just can't be planned for or budgeted. 12k seems a bit high to me. If you search around, you'll find 357s of that vintage in working condition for low 20s.

6-7k would make that a more doable project.

Just my two cents (you did ask for it) :D

Re: My Project F 35-7 In Classified...
 

yes I did ask for it. Thanks. I tought Hull could be 5000$, transom plate and gimball 1000$ each side, trannie 1000$ each side, plus a couple dollars for everything else...

Re: My Project F 35-7 In Classified...
 

Ya I would think that if some one offered you 5 grand you should send it up the road. Or part out the things that you have and then give away the hull.

Jon

Re: My Project F 35-7 In Classified...
 

Looks like a nice project! I like the colors! But, doing some quick calculations, I would expect to put at least $25k into it before I would begin to hope that it would run! $25k would be broken down as follows-$15k for low hour or rebuilt 502's, at least $7k for drives and gimbal assemblies and then $3k for misc wiring motor mounts etc... But then you still have the rest of the boat to deal with... Good luck!

Re: My Project F 35-7 In Classified...
 

nice color, would be a hell of a boat with some investment and tlc

Re: My Project F 35-7 In Classified...
 

I just happen to have 2 502 MPI's .... all fresh ... 500 EFI cams Crane Roller valve train ..16K .......... :drink:

Re: My Project F 35-7 In Classified...
 

Could trade with a project cat if anybody interested...

Re: My Project F 35-7 In Classified...
 

I do love the bolsters they would match my 242 :D