What is this for:
11-01-2006 | 10:16 AM
#11
Registered
Joined: Nov 2005
Posts: 205
Likes: 0
Re: What is this for:
Originally Posted by WAGS382
you will find two float switches under the step that are not in the shower sump.
The switch looks like a blue box, you can turn the pivot pin and activate the pump.
The lower one is for the pump and the higher one is for the high water alarm, the alarm takes a few seconds to sound if you want to test it.
I hope this helps.
Jeff
The switch looks like a blue box, you can turn the pivot pin and activate the pump.
The lower one is for the pump and the higher one is for the high water alarm, the alarm takes a few seconds to sound if you want to test it.
I hope this helps.
Jeff
G.
