axapowell

I know in the past there were several videos of Formula owner's boats. How about a thread dedicated to that!!

I'll start...here is the latest

http://media.putfile.com/353-2006

And here is the homepage for a few others!

http://www.putfile.com/axapowell/media

Let's see what you've got!!

Dave

RaggedEdge

Well I know what you have been doing all day. Give a kid a new toy to play with........ you've been a busy boy. The music is a nice touch, but I prefer the 16 cylinder, straight pipe concerto in the video of my "Beak boat". That is real music to the ear of a hot rod boat guy.

BTW thanks for the credit line. You could put the rest of the videos up too. The Mayor would likely enjoy the footage of his Formula in action.

Click on AXA's second link, then click on the 35 Fountain(bad word here, but) for the real deal. The "Concerto" in 16 cylinders.

5PMSMWHR

I don't remember signing a release............nice vid dude! Camera guy a little shaky, almost got a beek shot in there...

axapowell

Oh...Do I have ammo now!! SJ gave me a WHOLE disk of pictures..

From one Cowboy to another!!

Dave

RaggedEdge

Camera gal, you stand corrected ! And when the fock are you going to buy a boat ? The Morristown Donzi was sitting out front at Aquamania yesterday, you should call to see if something is up there. Oh, Thank You, Thank You !

RaggedEdge

Cow Girl to Cow Boy!!!! Looks like a lot of cow chit comming here.

axapowell

That would be camera chick...Little guy don't know how to run that there kinda techno equipment


I'll post the other's when I get time to build them.

Dave

RaggedEdge

Not into the "techno chit" , just the grease, oil, and horsepower chit for me.

axapowell

Did you say drive?


Dave

cuda

I made three short videos today, because I had been working on the water circulating system. I wasn't getting any water out the exhaust while on the hose. I had rebuilt the pump, flushed every damn place I could get a hose off, took the pump off twice to check I put it together right. Yesterday, I took the pump off the other engine and swapped them. Still no water out the starboard engine, but the port worked with the pump I had rebuilt.

So today, we hooked up the truck, and hauled it to the boat ramp to see if it would circulate with the water coming through the intakes. Fired up the offending engine, and wham! Plenty of water coming out. The problem is where you turn the valve to change to flush mode. The valve must be hung closed, because the valve still moves. Anyway, after all this trouble, all it is is the flushing system. I'm pretty happy right now, but not looking forward to getting down to where that valve is located.
http://www.zippyvideos.com/804785485...2006_011/*cuda
http://www.zippyvideos.com/665139750...2006_012/*cuda
http://www.zippyvideos.com/917743821...2006_013/*cuda