Go Back  Offshoreonly.com > Owners Forum > Formula
Bow Hatch  Adjuster Came Loose >

Bow Hatch Adjuster Came Loose

Notices
Formula

Bow Hatch Adjuster Came Loose

Thread Tools
 
Old 12-06-2006 | 12:58 PM
  #1  
berns29scarab's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Jul 2004
Posts: 7,152
Likes: 13
From: Toms River, NJ
Default Bow Hatch Adjuster Came Loose

have a 1999 fastec 353 and the forward deck hatch adjusters came apart from the hatch. formula says theres nowat to readhere these, and bomoar says there SONICALLY attached and cant be repair but have to be replaced any ideas ?!?!?!
berns29scarab is offline  
Reply
Old 12-06-2006 | 01:21 PM
  #2  
Charter Member #415
 
Joined: Nov 2000
Posts: 3,357
Likes: 0
From: Jasper,Alabama
Default Re: Bow Hatch Adjuster Came Loose

Did the flat end just release itself from the lid or did the arm break somewhere?
Magicfloat is offline  
Reply
Old 12-06-2006 | 06:33 PM
  #3  
Registered
 
Joined: Aug 2002
Posts: 2,896
Likes: 3
From: Eastern Lake Ontario
Default Re: Bow Hatch Adjuster Came Loose

Originally Posted by berns29scarab
SONICALLY attached
WTF does "sonically attached" mean. Sonic relates to sound.

Must be a "clap on, clap off" eh!?


Now here this,, all 353 owners,,, no clapping allowed on board!!!!!!!!

Be interseting to hear what Bomar means by that.
ThirdBird is offline  
Reply
Old 12-06-2006 | 08:10 PM
  #4  
Registered
20 Year Member
 
Joined: Dec 2002
Posts: 4,815
Likes: 42
From: 1000 Islands
Default Re: Bow Hatch Adjuster Came Loose

Originally Posted by ThirdBird

"clap on, clap off"
"she's got the clap"?
Originally Posted by ThirdBird

Be interseting to hear what Bomar means by that.
just keep your mind on the reactor control panel
a man in your position who can't spell makes me nervous.
Rippem is offline  
Reply
Old 12-07-2006 | 05:45 AM
  #5  
Registered
 
Joined: Aug 2002
Posts: 2,896
Likes: 3
From: Eastern Lake Ontario
Default Re: Bow Hatch Adjuster Came Loose

Originally Posted by Rippem
"she's got the clap"?


just keep your mind on the reactor control panel
a man in your position who can't spell makes me nervous.
It's all just acronyms around here.
ThirdBird is offline  
Reply
Old 12-07-2006 | 07:02 AM
  #6  
Registered
20 Year Member
 
Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
Default Re: Bow Hatch Adjuster Came Loose

Originally Posted by ThirdBird
It's all just acronyms around here.
So do we want to know what "Oh FU@k" means ?
RaggedEdge is offline  
Reply
Old 12-07-2006 | 08:58 AM
  #7  
berns29scarab's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Jul 2004
Posts: 7,152
Likes: 13
From: Toms River, NJ
Default Re: Bow Hatch Adjuster Came Loose

Originally Posted by Magicfloat
Did the flat end just release itself from the lid or did the arm break somewhere?
nothing broke the round part that is SONICALLY attached to the plexiglass just came off both the forward hatches.
berns29scarab is offline  
Reply
Old 12-07-2006 | 09:31 AM
  #8  
Charter Member #415
 
Joined: Nov 2000
Posts: 3,357
Likes: 0
From: Jasper,Alabama
Default Re: Bow Hatch Adjuster Came Loose

I have never had that happen,usually the arm breaks and the entire hatch has to be replaced. Surely some type of glue would bond the part back to the lid.Wouldn't have to be all that strong as you should only need the hatches open while not running. If you try to run the boat with them open,you risk breaking some of the adjuster parts,and then you have an expensive fix. With all the hi-tech adhesives now available,something should work. I would certainly try it,hatches are not cheap.
Magicfloat is offline  
Reply
Old 07-23-2007 | 09:57 PM
  #9  
t500hps's Avatar
21 and 42 footers
20 Year Member
Platinum Member
Super Moderators
 
Joined: Sep 2004
Posts: 8,207
Likes: 146
From: Richmond VA
Default

So what was the fix here bern....did you get it worked out? We just had the bracket that is "sonically " attached break where the ram is pinned into it.
t500hps is offline  
Reply
Old 07-25-2007 | 07:25 PM
  #10  
berns29scarab's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Jul 2004
Posts: 7,152
Likes: 13
From: Toms River, NJ
Default

i used a 2 part epoxy to re-adhere it
berns29scarab is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.