No the height of the city/state does not have to be 4 inches high. Mine are 4" high on the name and 2" high on the city/state.

The overall height is 6" and the length is 38". Call Jay and he will take care of you.

Don

Like this?


Dave

I believe your boat name and hailing port need to be in four inch letters. Not sure on how well they enforce this requirement. I go past a Coast Guard station everytime I take the boat out and they usually look.


HOW DO I MARK MY VESSEL?

The name and hailing port of a recreational vessel must be marked together on some clearly visible exterior part of the hull. The vessel name of a commercial vessel must also be marked on the port and starboard bow and the vessel name and the hailing port must also be marked on the stern. All markings may be made by any means and materials that result in durable markings and must be at least four inches in height, made in clearly legible letters of the Latin alphabet or Arabic or Roman numerals. The "hailing port" must include both a place and a State, Territory, or possession of in the United States. The state may be abbreviated

Here ya go, everything you could possibly want to know about Coast Guard documentation

http://www.uscg.mil/hq/g-m/vdoc/faq.htm#15

Hey,Premier,got info on your hatch mirrors. Kind of expensive,you should be able to get them done locally for a couple hundred $,but I will order from Formula if you like,email me,Robert

How much? I also looked into the mat place you gave me for the carpet but I think we would rather just get it directly from Formula (you) I need to make a list of everything we want then I will get back with you.

thanks!

this is what we came up with, what do you guys think?

Edit: I have another angle, but its on a 7mp camera and way too big. how do I make it smaller so I can attach it?

Looks nice:drink:

thanks man! did you ever get a price on that last piece I asked about? The metal piece that goes over the K&N filters on the 600hp 382? Thanks again