White face VDOs to update the SR1
#1
Registered
Thread Starter
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
White face VDOs to update the SR1
What do you think? I guess I'm letting the cat out of the bag at this point. But I'm thinking they'd set of nicely against say a silver dash and possibly blue-accented gauge panel. I know Formula stole my color ideas but I already had these colors in mind when I first saw DGDuck's 311 white painted dash project.
#6
Registered
Thread Starter
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
I actually like the simple look of not having bezels. Plus these newer VDOs have individual hour meters in the tachs, so they can be monitored seperately.
RonS, which gauges do you have in there? I'm thinking about relocating the fuel, and possibly going with only one volt meter (like all the new boats), and being able to add oil temp and water pressure.
#7
Registered
Join Date: Oct 2000
Location: Sussex, WI
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Speedo, tachs, oil pres, oil temp, water temp 1fuel and 1 volt meter, Tach's and Speedo are the large size monsters so you could free up some room with smaller tach's and speedo and maybe add the water pressure . Hard to tell but the panels are carbon fiber, I was going to do powder coated black panels but the carbon fiber seemend to dress it up a bit.
Last edited by RonS; 01-29-2008 at 01:58 PM.