TIBBC "The Thread" again...
08-05-2008 | 11:41 AM
#982
Registered
Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
5PM is real good at stirrin' up chit so it would hold he would be an expert at poking around in it.
Sorry to hear Bucky chit himself, maybe he and Axa can swap stories this weekend
. Do think I'll pass on that session though.
Last edited by RaggedEdge; 08-05-2008 at 11:48 AM.
08-05-2008 | 06:19 PM
#983
Registered
Joined: Dec 2002
Posts: 4,815
Likes: 42
From: 1000 Islands
plan on being around again tomorrow, Thurs...
will call shortly Jeff
08-05-2008 | 06:41 PM
#984
Registered
Joined: Dec 2002
Posts: 4,815
Likes: 42
From: 1000 Islands
is was nice to get back to the boat, been a little busy
this project: http://www.offshoreonly.com/forums/s...d.php?t=192374
the corolla has all new rear brake lines from the master cyl. back
I had a faaart and hit something I know all about with the mower deck and bent an arbor housing all to h&ll- the shaft and bearing were fine, amazing considering the hit. It was steel hit it with the center blade-stoped cold- even tweaked the arbor flange on the deck, and this isn't lightwieght stuff.
It hopped the belt in the deck...the shaft drive never missed a beat
I need to mow this place...when it's not raining!
Throw a couple days a week at work in there...
I've been out straight.
look forward to meeting you in person tomorrow Jeff.
this project: http://www.offshoreonly.com/forums/s...d.php?t=192374
the corolla has all new rear brake lines from the master cyl. back
I had a faaart and hit something I know all about with the mower deck and bent an arbor housing all to h&ll- the shaft and bearing were fine, amazing considering the hit. It was steel hit it with the center blade-stoped cold- even tweaked the arbor flange on the deck, and this isn't lightwieght stuff.
It hopped the belt in the deck...the shaft drive never missed a beat
I need to mow this place...when it's not raining!
Throw a couple days a week at work in there...
I've been out straight.
look forward to meeting you in person tomorrow Jeff.
08-05-2008 | 06:56 PM
#985
Registered
Joined: Dec 2002
Posts: 4,815
Likes: 42
From: 1000 Islands
'Bird, you got Dexter 12x2 surge drums on your trailer?
I've got 6 new wheel cylinders that RedDog382 sent me gratis
that he couldn't use after Kodiak-ing
Now niether can I.
I have six good drums and thier matched bearing sets. I numbered everything together. The bearings and races are excellent not a mark on either/any. Seals gone of course.
the assemblies themselves can be scalped for hardware and backing plates- the existing shoes and wheel cylinders are beat.
If you can use the stuff for spares ect. yours for the taking first
or anyone else?
otherwise they go to scrap/junk
I've got 6 new wheel cylinders that RedDog382 sent me gratis
that he couldn't use after Kodiak-ingNow niether can I.
I have six good drums and thier matched bearing sets. I numbered everything together. The bearings and races are excellent not a mark on either/any. Seals gone of course.
the assemblies themselves can be scalped for hardware and backing plates- the existing shoes and wheel cylinders are beat.
If you can use the stuff for spares ect. yours for the taking first
or anyone else?
otherwise they go to scrap/junk
08-05-2008 | 07:00 PM
#986
Registered
Joined: Jul 2007
Posts: 527
Likes: 0
From: Lapeer, Mi
'Bird, you got Dexter 12x2 surge drums on your trailer?
I've got 6 new wheel cylinders that RedDog382 sent me gratis that he couldn't use after Kodiak-ing
Now niether can I.
I have six good drums and thier matched bearing sets. I numbered everything together. The bearings and races are excellent not a mark on either/any. Seals gone of course.
the assemblies themselves can be scalped for hardware and backing plates- the existing shoes and wheel cylinders are beat.
If you can use the stuff for spares ect. yours for the taking first
or anyone else?
otherwise they go to scrap/junk
I've got 6 new wheel cylinders that RedDog382 sent me gratis
that he couldn't use after Kodiak-ingNow niether can I.
I have six good drums and thier matched bearing sets. I numbered everything together. The bearings and races are excellent not a mark on either/any. Seals gone of course.
the assemblies themselves can be scalped for hardware and backing plates- the existing shoes and wheel cylinders are beat.
If you can use the stuff for spares ect. yours for the taking first
or anyone else?
otherwise they go to scrap/junk
08-05-2008 | 07:33 PM
#987
Registered
Joined: Dec 2002
Posts: 4,815
Likes: 42
From: 1000 Islands
08-05-2008 | 08:29 PM
#988
Registered
Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
08-05-2008 | 08:38 PM
#989
Thread Starter
Where To
Joined: Nov 2001
Posts: 2,517
Likes: 4
From: Alexandria Bay, NY 1000 Islands
For some reason....BBlades sent me a set of Turbo's. They seem to be of the 30" pitch and labbed? Anyone?
Dave
Dave
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
Air, Sea, and Land...Exploring the planet in 3-D!
08-05-2008 | 08:58 PM
#990
Registered
Joined: Sep 2004
Posts: 512
Likes: 0
From: Phoenix N.Y.
Keep the cool boxes that they come in and send me over the blades..I will give them a try..Some one was telling me you were missing a pair of the shipping boxes..
