292 grab handles...
#11
Registered User
Thread Starter
Join Date: Mar 2008
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
I can relate. As of May 16, 2008 my wife and I are the ONLY individuals with a 292 that has Hot Rod Graphics. Very rare boat in deed just like your all white 292. Formula told me that this was their third Hot Rod Graphics applied to any FasTech they have produced. The first was on Vic Spellberg's Poker Run Special 382 and the second was on Bald Knob's 353.
Very excited about delivery on June 14th. We'll meet up hopefully this summer and BS over a weekend.
Very excited about delivery on June 14th. We'll meet up hopefully this summer and BS over a weekend.
Good luck with delivery on that rare bird!!!!
#12
Registered
Join Date: Feb 2007
Location: Chicago, Il
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
I can relate. As of May 16, 2008 my wife and I are the ONLY individuals with a 292 that has Hot Rod Graphics. Very rare boat in deed just like your all white 292. Formula told me that this was their third Hot Rod Graphics applied to any FasTech they have produced. The first was on Vic Spellberg's Poker Run Special 382 and the second was on Bald Knob's 353.
Very excited about delivery on June 14th. We'll meet up hopefully this summer and BS over a weekend.
Very excited about delivery on June 14th. We'll meet up hopefully this summer and BS over a weekend.
#13
Registered User
Thread Starter
Join Date: Mar 2008
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
When I bought my 292 Blaze at the boat show I was told they were only making two 292s in that graphic, one for the LA boat show and one in Chicago. So I traded in the 292 I had just bought in the Fall, and I bought the Blaze graphic one. 2 months later I saw 2 other 292s in blaze at the dealership!!!
Well, that blows....
#14
Registered
Join Date: May 2008
Location: Chicagoland, IL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
When I bought my 292 Blaze at the boat show I was told they were only making two 292s in that graphic, one for the LA boat show and one in Chicago. So I traded in the 292 I had just bought in the Fall, and I bought the Blaze graphic one. 2 months later I saw 2 other 292s in blaze at the dealership!!!
Yeah, that does in deed BLOW! I told Bald Knob to express to individuals interested in the Hot Rod graphics that Formula ran out of Imron to paint that schematic. I thought Brigg told me that Bald Knob sold 4-Blaze 292's. I'm sure once my 292 gets the exposure the Hot Rod will be very popular.
For '09, Formula has a new Platinum graphic for their FasTechs named "Terminal Velocity."
#15
Registered
Well, I got them to work and here they are. Still had to drill new holes, but no big deal. The backing plates cover nicely and you can never tell there are extra holes back there!!!! Sory for the poor pic quality, it was my phone, but non the less, a HUGE improvement if I do say so myself!!
Where did you buy those grab handles and what are the part numbers? They really look sharp and I'm thinking of making a swap!
Dave
#16
Registered User
Thread Starter
Join Date: Mar 2008
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
#17
Looks great Bill, those grap handles look awesome.
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#18
Registered User
Thread Starter
Join Date: Mar 2008
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Bill,
Can you get these for 4mulafastech?
here are the p/n's...
the handles are 275-50P--retail is 34.00 each.
the backing plate is 275-35P--retail is 18 each.
The P in the part number is for polished...any more questions, just let me know. Normally I buy everything from Diamond Performance, but I Had questions and this was trial and error, so I went with Eddie Marine directly, but now that I have the numbers, I suggest anyone order from Bill at diamond Performance!!
Can you get these for 4mulafastech?
here are the p/n's...
the handles are 275-50P--retail is 34.00 each.
the backing plate is 275-35P--retail is 18 each.
The P in the part number is for polished...any more questions, just let me know. Normally I buy everything from Diamond Performance, but I Had questions and this was trial and error, so I went with Eddie Marine directly, but now that I have the numbers, I suggest anyone order from Bill at diamond Performance!!
#19
Registered
Bill, thanks for the part numbers! Now you know I would have questions... Are they polished aluminum with a durable clearcoat? Did they come with hardware? I assume you had to drill holes between the existing and the plate covered the old?
#20
Registered User
Thread Starter
Join Date: Mar 2008
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
They are anodized and after a LONG weekend in MI, there is not a mark on them. you will need to get hardware for them. I used one existing hole, the bottom one and drilled a new top hole. That is why I go the backing plates to cover a hole They are actually very comfortable handles too if someone were to use them.