**** NEWS FLASH****


The first FIVE are ordered!!!

If you want in on this first order...Better get in NOW!! It may take a while to get the next five. Remember, the machine shop will only do a MINIMUM of FIVE. You Snooze...You Lose!

I'll take orders until Tuesday the 26th.

Dave

Shameless, I know you are interested...You are not able to get PM's. Let me know. I have PM'd everyone else from the other thread who expressed interest!

Dave

Did you get my PM Dave? I sent one with my info a couple of days ago, thanks for doing this.

Dave,

my check is in the mail, Greay Job !!!

These look great, but how hot are they going to get out in the sun ...? My polished stainless windshield frame will talk to ya if sitting in bright sunlight for a little while.

#6 Has been ordered. I'm in. Dave I sent you a PM. Those things look outstanding. Great job, perfect compliment to the handles.

They shouldn't get any hotter than the polished SS grab handles all around the boat. Plus, they are really in a location where I don't think they are touched much anyway. The seat is an arm rest and I never use them as actual steps. NOBODY gets in our boat with shoes and you just step on the sunpad or seats.

Personally I think this is a perfect upgrade. Looking around the entire Fastech cockpit the only 'cheap' looking thing are those darn plastic step/cup holders...

Dave, you should receive my check tomorrow!

FRMULTR...Got it and I have responded! SIX ordered!

Dave, Got your PM!

4mulafastech, I git your PM, and to address your concerns:
The machinc shop know that these are going to be polished, so care will be taken not to cause any major scratches or machine marks. The rubber pads will come NOT installed, due to the fact some will be coating these. And finally, I will be sure to pack these with care before I ship them!

Thanks all, I'll keep you up to date. It's not too late to get in on the first order!

Dave

Someone needs to get ahold of Bill, (Shameless). I'd be willing to bet he'd want some. I think some of his buddies hang out on SW, I'll give notice over there.

Things are looking pretty good for a first run.

A few notes: After further thought on my 353...

I am going to cut the handle trim plate today and see how it looks. I think with the thickness of the new step, it needs to be flush with the gunwhale panel. If that doesn't work, it was a cheap way to find out (price of the trim plate). I think it will look fine and mate nice to the new step plate. If not, I might design a new trim piece with a different cut on the top and bottom. I would have to see how much it would cost to tool one up.

I also think the plates will have to be coated with something, still considering red for the step plate and polished for the handle.

A few people were wondering how anyone was making out with the coating options? Anybody have anything yet?

Thanks, and I will respond to all of the PM's once your check arrive!

Dave