Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Formula (https://www.offshoreonly.com/forums/formula-36/)
-   -   223 LS Hull 75+ mph possible (https://www.offshoreonly.com/forums/formula/215403-223-ls-hull-75-mph-possible.html)

BiLLyLaurianO 08-21-2009 01:40 PM

223 LS Hull 75+ mph possible
 
Whats the fastest it can handel? Im around 62-65mph in my girls 87 223ls figured down the road its getting a 502 maybe blower as well.

MillershighLife 08-21-2009 02:19 PM

I get 75 out of my 242ls . i hear the 223 is a faster hull obviously it'll be lighter and i think its got a different deadrise. might be a squrly right but with the right power it shouldnt be a problem

turboz67 08-21-2009 05:12 PM

i have 91 223ls i hit 81mph according to the gps

BiLLyLaurianO 08-24-2009 09:39 AM

Any one else.. Any nice videos?

Rusty223ls 09-19-2009 06:59 PM

My 223ls,?
 

Originally Posted by turboz67 (Post 2936861)
i have 91 223ls i hit 81mph according to the gps

Im wondering what you have for a setr up on your boat, I am building my motor now, a '97 Gen 6 454, going to deck and port the heads, cam, intake, and 850 cfm carter afb, have two stern drivesone Bravo 3 dual prop w/2.00 ratio, and a bravo 2 with 1.50 ratio, Mercuryracing.com prop slip calc. calls for a 25 pitch 17.5in dia. and promises 83 mph at 5000 rpm. What do you think?

endeavour32 09-26-2009 02:28 PM


Originally Posted by Rusty223ls (Post 2956340)
Im wondering what you have for a setr up on your boat, I am building my motor now, a '97 Gen 6 454, going to deck and port the heads, cam, intake, and 850 cfm carter afb, have two stern drivesone Bravo 3 dual prop w/2.00 ratio, and a bravo 2 with 1.50 ratio, Mercuryracing.com prop slip calc. calls for a 25 pitch 17.5in dia. and promises 83 mph at 5000 rpm. What do you think?

Neither of your sterndrives are good for what your trying to do. You need a bravo 1 drive. I also think your going to need to do a lot more to your engine in order to hit 83 mph.... I'd say your going to need over 450 hp to hit that number. Porting your heads isn't going to do much. I'm not sure if your boat has peanut or rectangular port heads but neither are good for what your trying to do. If your budget allows it, get a set of AFR 265 ovals. But you're also going to need to replace your pistons with a higher compression ratio. Do your research, 85 is going to take one stout motor


All times are GMT -5. The time now is 08:52 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.