Some Formula Parts are needed
02-24-2010 | 10:07 PM
#1
Thread Starter
Registered
Joined: Sep 2007
Posts: 35
Likes: 2
From: Long Island
Some Formula Parts are needed
(updated 3/6/10) Hi, I just pick up a Formula 272 for next to nothing. I will be needing the following parts. There is no rush, so if you have or know someone who has the following parts let me know. Thanks. I found a platform and some hatches.
1) Engine hatch (Any model engine hatch is acceptable, I dont mind cutting one to fit or doing a little bit of fabricating, I would rather not have to fab an entire one unless absolutly necissary)
2) Cabin Hatch and entry doors (the hatch that opens up into the cabin and any doors)
3) WINDSHIELD (any suggestions?)
1) Engine hatch (Any model engine hatch is acceptable, I dont mind cutting one to fit or doing a little bit of fabricating, I would rather not have to fab an entire one unless absolutly necissary)
2) Cabin Hatch and entry doors (the hatch that opens up into the cabin and any doors)
3) WINDSHIELD (any suggestions?)
Last edited by murph2255; 03-06-2010 at 10:38 PM.
02-25-2010 | 08:33 PM
#5
Registered User
Joined: Jan 2009
Posts: 65
Likes: 0
From: Bronston, KY
Hi, I just pick up a Formula 272 for next to nothing. I will be needing the following parts. There is no rush, so if you have or know someone who has the following parts let me know. Thanks.
1) Silent Thunder Platform (any condition is fine as long as its not hacked up or crushed, I dont care about the color)
2) Engine hatch (Any model engine hatch is acceptable, I dont mind cutting one to fit or doing a little bit of fabricating, I woud rather not have to fab an entire one unless absolutly necissary)
3) Cabin Hatch (the hatch that opens up into the cabin and any doors)
4) Windshield (I may be able to get this on the aftermarket and I think I have found a few sources, but if someone had one, I would be interested.
5) The 2 Large Hatches, for some reason they are gone, I have the smaller ones.
1) Silent Thunder Platform (any condition is fine as long as its not hacked up or crushed, I dont care about the color)
2) Engine hatch (Any model engine hatch is acceptable, I dont mind cutting one to fit or doing a little bit of fabricating, I woud rather not have to fab an entire one unless absolutly necissary)
3) Cabin Hatch (the hatch that opens up into the cabin and any doors)
4) Windshield (I may be able to get this on the aftermarket and I think I have found a few sources, but if someone had one, I would be interested.
5) The 2 Large Hatches, for some reason they are gone, I have the smaller ones.
murph2255
I will be taking off my silent thunder platform in a couple of weeks. My boat is an '05 353....not sure if it will fit your 272. If you can find out and you are interested PM me.
Ken
02-25-2010 | 10:21 PM
#7
Thread Starter
Registered
Joined: Sep 2007
Posts: 35
Likes: 2
From: Long Island
Yeah that 353 is not the right size unfortunatly. I think this one was originally listed in Huntington bay..but probably the same boat, I got it from the guy who bought of the guy in huntington bay/station...if that makes sence. He needed it gone, and took next to nothing for it. Works for me.
02-25-2010 | 10:24 PM
#8
Thread Starter
Registered
Joined: Sep 2007
Posts: 35
Likes: 2
From: Long Island
mrfixxall, your in the right location..very funny. I will get some measurements, we are getting more snow here in NY and I am out fo the country in a few days, so I will let you know as soon as I know. What model Formulas are they off of?
