Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Formula (https://www.offshoreonly.com/forums/formula-36/)
-   -   re-setting the windsheild (https://www.offshoreonly.com/forums/formula/230514-re-setting-windsheild.html)

theadamv1 05-26-2010 11:17 AM


Originally Posted by offthefront (Post 3120319)
Are the screws under the Rubber Gasket? So you pull the Gasket , remove the screws and then you could remove the entire Assembly? Is it leaking between the frame and the weather stripping?

What I would like to have is a new rubber Gasket ..... I cant believe its not available or at least there isn't someone that could make some up ....Maybe if we bought 10 sets ? ........m

are you talking about the filler strip? or the actual gasket between the frame and hull??

offthefront 05-26-2010 12:36 PM


Originally Posted by theadamv1 (Post 3120334)
are you talking about the filler strip? or the actual gasket between the frame and hull??

Filler Strip ...

theadamv1 05-27-2010 07:26 AM


Originally Posted by offthefront (Post 3120424)
Filler Strip ...


My 88 actually has molded plastic filler strip that snaps in the channel where the screws secure the w/sheild frame to the hull to conceal the screws..

Audiofn 05-27-2010 10:21 AM

I think that there are some bolt that you access through the side panels and then in the front of the windsheild you have screws under the rubber. Mine is like "theadamv1" with just a almost flat plastic filler. I would like to get new one however as mine has also shrank a bit.

pdm007 05-27-2010 07:01 PM

Where the Curved windshields meets on my 89242LS has this shrinkage.... Can we fix it or have to replace it??

got twins ? 05-27-2010 08:24 PM


Originally Posted by offthefront (Post 3120319)
Are the screws under the Rubber Gasket? So you pull the Gasket , remove the screws and then you could remove the entire Assembly? Is it leaking between the frame and the weather stripping?

What I would like to have is a new rubber Gasket ..... I cant believe its not available or at least there isn't someone that could make some up ....Maybe if we bought 10 sets ? ........m

Count me in .... I need to the same thing .....

I had 5 guys lift it off and "seal it" .... worked until I used my boat with the bimini top up.

Ever since then it has leaked again .... what a pain in the azz!

Jeff

jmrapp 05-28-2010 09:27 AM

I would be in for a gasket as well. I have one side that has the flat plastic part and the other has nothing.

offthefront 05-28-2010 06:26 PM

I'll do some checking next week .....m


All times are GMT -5. The time now is 07:48 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.