382 Drive Alignment?
 

I know this has been posted many times,but I'm looking for specifics. Where should my XR's be set on a 2004 382. Toed in, out, or straight? Right now they are 1/2 inch in,and it just seems a little much. Any help would be appreciated.

drives in or out i have always set mine at o, not in or out you will hear toe in or out from others and I will not disagree but, less resistace means more speed and I have not seen any nevgative handling results on my Formula's v-hulls and step hulls with setting the drives at 0 % in or out.

Thanks,
Jeff

Jeff
Thanks for the input. I will set them up at 0 this weekend and give them a try.

I once read somewhere (Teague tips i think) 1/8 inch in if you turn your props in and 1/8 inch out if you turn your props out. The theory behind this is that the spinning torque of the propellers will then actually make the drives at zero at speed.