Originally Posted by Baja226sport (Post 3294972)

I have an opportunity to replace all of my gauges and cup holders really, really cheap but I need some info asap!!

The boat is shrink wrapped and my memory is failing me.

I know there are 10 gauges total in the dash but what are they and what size?

I know 2 tachs, speedo, 2 oil pressure, 2 water temp, fuel....that is 8. What am I forgetting? 2 for voltage or 1?

And what else?

Are they 3 1/3 amd 2 1/8????

Last, factory cup holders....how many and what size????

HELP HELP HELP!!!!

Originally Posted by F357 (Post 3295825)

I have a 357 but the gauges should be the same. Just was looking at them last weekend. 3 3/8" for tach and spedo. 2 1/16" for the rest.

1 spedo
2 tachs
1 Fuel
2 volts
2 oil pressure
2 water temp
2 hour meter

There are 4 cup holders all of them are 3". 2 up front and 2 next to the back bench. Just measured them last week end.

Hope this helps.

Originally Posted by Cold Sweat (Post 3298899)

Just a thought, if you buy the tachs with the built in hour meters, you'll have 2 open spots for useful gauges like a couple oil temp or water pressure gauges. I'm replacing mine in the spring, going with oil temp for sure. '88 357

Originally Posted by Cold Sweat (Post 3298899)

Just a thought, if you buy the tachs with the built in hour meters, you'll have 2 open spots for useful gauges like a couple oil temp or water pressure gauges. I'm replacing mine in the spring, going with oil temp for sure. '88 357

Originally Posted by formula 382 sr-1 (Post 3298975)

Yup :lolhit: Autometer

Originally Posted by Baja226sport (Post 3299195)

Thanks for the great pictures....got what I needed!!!

Who made the dash panel for you??