silent thunder gasket/seal
 

I looking to see if anyone can tell me the best gasket/seal material to use to re-attach my silent thunder. I don't want to use any sort of caulk/adhesive that would make it hard to remove in the future should I decide to take it off again. must be something out there that you guys are having good success with.

thanks
Dennis

I took mine off a few years ago and replaced it. I bought one from Nelmes marine, Robert is on the site. I hate to say it but it looks like heavy duty weather stripping. Or just try a Formula dealer $$ it`s not that bad.

From 8 years ago when I was the artist formally known as Craig223.....but that's the beauty of this place.. :D:drink::evilb:

Formula is a great company. You can most likely still get the gasket from them. :)

http://www.offshoreonly.com/forums/f...placement.html

if you have a local Rubber materials supplier you just need a "D" shaped Gasket ....glue the flat part of the D to the Transom ....also a ring around each exhaust outlet ......m