Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Formula (https://www.offshoreonly.com/forums/formula-36/)
-   -   292 SR1 Project (https://www.offshoreonly.com/forums/formula/252878-292-sr1-project.html)

endeavour32 05-04-2011 04:58 PM

292 SR1 Project
 
1 Attachment(s)
Well the fun began today on the 292 SR1. For the most part everything on this checks out solid and intact. I fired up the engines today, which both ran good other than I couldn't get water to come out the exhaust. I thought there was a drain open somewhere but I couldn't find it. Then I found it. When the engines were winterized the oil coolers were not drained. Both of them popped the end off. So I think friday I'll be pulling one of the engines so I can replace the coolers. Not a big deal, I have one laying around from my 242 and I can get a replacement for the other easy enough. Either way here are a few pictures, first one is as I got it, being towed home to Michigan here! I'll add more as I go but the project is pretty much going to be on hold until May 24th.

88242LS 05-04-2011 05:00 PM

awesome, I think the rubrail is missing, when you get a new one make sure you put a white one on really nice update

endeavour32 05-04-2011 05:08 PM

3 Attachment(s)
Here are a few more after a good bath. I took 3M Finese It to the Imron and it buffed out to like new. Then some 3M super duty to a small area of gelcoat and it polished up great as well... A couple days of buffing and the exterior should be looking near new.

endeavour32 05-04-2011 05:10 PM


Originally Posted by 88242LS (Post 3394720)
awesome, I think the rubrail is missing, when you get a new one make sure you put a white one on really nice update

It is missing a rub rail, and that was going to be my next question. Do you guy think I should stick with the factory black or go with the newer white? Black doesn't get beat up looking like I'm guessing white can, but I've never owned a boat with a white rub rail.

88242LS 05-04-2011 05:12 PM

absouletly go with the white


http://i495.photobucket.com/albums/r...s/HPIM4542.jpg

88242LS 05-04-2011 05:13 PM

http://i495.photobucket.com/albums/r...s/HPIM3752.jpg

mung272 05-04-2011 09:12 PM

Go Black with a stainless insert, white doesn't match the gel color on the older boats very well, and shows scars...

Stainless adds like $300 and lasts forever

mung272 05-04-2011 09:17 PM

Congratulations on the boat. That will be a great project, I missed it by a couple of hours... (I was on a buisness trip)

I'm in Holland, how far north are you? or what lakes should I look for you on?

endeavour32 05-04-2011 09:43 PM

I'm in Onekama and will keep the boat on Portage Lake. I may bring it down to your area this summer, I've got some buddies in the Grand Haven area.

32 vette 05-04-2011 09:47 PM


Originally Posted by endeavour32 (Post 3395040)
I'm in Onekama and will keep the boat on Portage Lake. I may bring it down to your area this summer, I've got some buddies in the Grand Haven area.

Looking good


All times are GMT -5. The time now is 06:47 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.