Looks great!!!!

t500 thw scary part was waiting 7 months before being able to put it all back together. I was starting to have nightmares of not being able to remember or follow my notes from back in early November.

Wow, looks great! Big difference.

At least you put everything back where it came from. I moved every single one of my guages to new locations (even a new pattern from the old). My guages were set with port/starboard beside each other related to oil/temp/etc. Now it's patterned port motor on port side, starboard motor on starboard side.

Here's a pic of the old. Note I had removed the compass and made a star-board plate to hold the GPS. I incorporated the GPS into the new dash.

Normally you want to put gauge functions next to each other so at a quick glance you can see a problem by quick comparision to the adjacent gauge.

I just got back from my test run and I'm very happty to report that everything works as should.... now it's time to celebrate the results I am heading for the beer

I recently purchased a 2002 Fastech 312. I would like to install a Garmin GPS/Plotter in the factory dash directly above the steering wheel.
I am pretty sure that the 400 series Garmins will fit in this location, but does anyone know if the 500 series Garmins will?

Cheers
Ross