Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Formula (https://www.offshoreonly.com/forums/formula-36/)
-   -   port side motor squeeling (https://www.offshoreonly.com/forums/formula/256155-port-side-motor-squeeling.html)

ninetym 06-20-2011 06:11 PM

Had bad alternator that squeled. Took me awhile to figure out.

JayFan 06-20-2011 07:16 PM

Have you tried running the engine (under a fair amount of load) on muffs, with the engine hatch open and having someone listen to where the squeal seems to be coming from. I can't believe you can't detect, or close to, where the issue is.

1MOSES1 06-20-2011 09:04 PM

i am going to try and diagnose it sometime this week. i will let you know what i find. i had it on mufffs earlier in the ear on the old belts and it was fine.

08 fastech 292 06-21-2011 06:13 AM

I would not run the engine above 1,000 RPM's for any length of time on muffs. You'll risk tearing up the water pump and over heating. If you want to run the engine under load, do it in the water.

JayFan 06-21-2011 06:46 AM


Originally Posted by 2fast9tech2 (Post 3433950)
i am going to try and diagnose it sometime this week. i will let you know what i find. i had it on mufffs earlier in the ear on the old belts and it was fine.

Gotcha. In that case it might have to be done in the water. Bummer. Let me know what ya find......

1MOSES1 06-27-2011 05:39 AM

I tried searching but found nothing on the forums...Does anyone know if the latham power steering system on the Formula Fastech's only uses one hydraulic steering pump? I have hydraulic pumps on both engines but only one seems to be plumbed in...I have a lot of squeeling from the port side pump and instead of replacing it, i am looking to just buy a smaller belt and skip the pulley altogether. any input is appreciated.

just looking for a quick fix for vacation until i can replace it...

axapowell 06-27-2011 05:56 AM

In all of the applications I have seen, Formula only uses one of the pumps. Usually on the starboard side, the other pump is sometimes left on the opposite motor with a hose that connects the in and out as a loop thru. I would shorten that belt and leave it that way. There is no reason to run the spare pump.

Dave


All times are GMT -5. The time now is 03:46 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.