Help with Glovebox on 271 SR1
#1
Thread Starter
Registered
Joined: May 2008
Posts: 112
Likes: 0
From: Clinton Twp. MI
I sent my glovebox cover out to get re-powdercoated as it was starting to fade. This is the piece that is on a hinge and has a mirror on the inside of it and opens up to the glovebox on the passenger side. It was so long ago that i removed it that I forgot how to put it back on. I glued the part that has the cupholder in it, but can not figure out how to fasten this thing down correctly. Any Pics/diagrams would be greatly appreciated.
FYI. I remember unscrewing something at the top left corner of the piece, and there is a screw hole in the matching piece, however I just can't remember what it was that screwed in there
Sorry to sound like an idiot, just looking for som help from some fellow 271 owners!
FYI. I remember unscrewing something at the top left corner of the piece, and there is a screw hole in the matching piece, however I just can't remember what it was that screwed in there
Sorry to sound like an idiot, just looking for som help from some fellow 271 owners!
#3
Thread Starter
Registered
Joined: May 2008
Posts: 112
Likes: 0
From: Clinton Twp. MI
Thanks for the reply, meant to check on this post sooner. That seems to be what mine should have however it is broke off. There is a screwhole there that seems like it was made for that plastic piece. I'll have to research somewhere to locate a piece like that. thanks for your help!




