Go Back  Offshoreonly.com > Owners Forum > Formula
382 with Prochargers >

382 with Prochargers

Notices
Formula

382 with Prochargers

Thread Tools
 
Old 06-05-2002 | 09:55 PM
  #1  
Thread Starter
Charter Member #415
 
Joined: Nov 2000
Posts: 3,357
Likes: 0
From: Jasper,Alabama
Default 382 with Prochargers

Started this several weeks ago,time frame was longer than anticipated. New 02 382,no boxes,Hp500 efi'sWell known shop to install 8# boost prochargers. Stock the boat GPS's at 75,with a little engine time 76/77with28" props.Ran it today,34 1/2 props,4 people on board,full fuel tank,87.8 GPS hitting rev limiter hard.Have to decide now on 1.36 gears or bigger props(hard to do)I think we may see 90 GPs on this big heavy boat .I sure wish we had these motors in a 353. MagicFloat
Magicfloat is offline  
Reply
Old 06-05-2002 | 10:20 PM
  #2  
Thread Starter
Charter Member #415
 
Joined: Nov 2000
Posts: 3,357
Likes: 0
From: Jasper,Alabama
Default

It's nowhere near over. These props are not really that good,just the largest I had instock,not Merc labbed just a lot of pitch from a local guy,my stock 32's were not near enough. The boat owner is a really neat guy that just wants a big comfortable boat,wanted 85mph, we are going to surpise him if the creek don't rise and the drives don't blow. Will keep ya'll posted,genset goes in next week.
Magicfloat is offline  
Reply
Old 06-05-2002 | 10:22 PM
  #3  
Thread Starter
Charter Member #415
 
Joined: Nov 2000
Posts: 3,357
Likes: 0
From: Jasper,Alabama
Default

Keep the faith,Troutly, this boat has a 5 year warranty
Magicfloat is offline  
Reply
Old 06-06-2002 | 07:45 AM
  #4  
C_Spray's Avatar
Diamond Member #001
 
Joined: Oct 2000
Posts: 4,808
Likes: 5
From: Coastal North Carolina
Default

(Somewhat off-topic): How come the owner didn't order the factory generator? Speed sounds neat, though - the hull definitely gets happy over 70 mph.
__________________
Retired! Boating full-time now.
C_Spray is offline  
Reply
Old 06-06-2002 | 08:10 AM
  #5  
Thread Starter
Charter Member #415
 
Joined: Nov 2000
Posts: 3,357
Likes: 0
From: Jasper,Alabama
Default

It was a stock boat that Formula had already finished. I bought it just for stock. I would have ordered the genset if I had ordered from scratch.
Magicfloat is offline  
Reply
Old 06-06-2002 | 08:45 AM
  #6  
hp500efi's Avatar
Member #9
25 Year Member
Charter Member
 
Joined: Oct 2000
Posts: 4,273
Likes: 4
From: Pewaukee, WI
Default

Robert, those are some impressive numbers for that size boat. It sounds as though there is even more to be had . Those drives are another thing LOL

Looks like your deal went through on the 38 PQ? I don't see it listed anymore.

Take Care
Jeff
__________________
Member of the Liquid Jungle
hp500efi is offline  
Reply
Old 06-07-2002 | 02:13 PM
  #7  
hot water's Avatar
Registered
 
Joined: Feb 2002
Posts: 480
Likes: 0
From: Northern California
Default

You will probably lose a couple mph with that gen install

Where did you mount the innercoolers, are they congesting up the engine compartment?

Pictures, we want pictures
hot water is offline  
Reply
Old 06-07-2002 | 02:33 PM
  #8  
Thread Starter
Charter Member #415
 
Joined: Nov 2000
Posts: 3,357
Likes: 0
From: Jasper,Alabama
Default

Intercoolers are in front of the engines,plenty of room in a 382,the installation looks great,done by Hesco in Bham,they painted all the parts Merc Racing blue. I'll try to get some photos this evening.
Magicfloat is offline  
Reply
Old 06-10-2002 | 07:13 PM
  #9  
ApachePete's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Aug 2001
Posts: 1,072
Likes: 44
From: Sarasota,FL & Saugatuck, MI
Default Hey Robert

Any further progress dialing it in?
What did the total cost of the upgrade come to?
ApachePete is offline  
Reply
Old 06-10-2002 | 07:39 PM
  #10  
Thread Starter
Charter Member #415
 
Joined: Nov 2000
Posts: 3,357
Likes: 0
From: Jasper,Alabama
Default

Still working,ordered a pair of 34 Labs from Merc Racing this morning,wasn't happy with the 34's built from 30's by a local prop shop.Hesco in Bham charged the customer $20000 for everthing, they did a proffesional job, everything is flawless. I wouln't hesitate to use them again,they are pro's at this,not the cheapest but the best around here and relly care about their work,called several times to check and coming back when the new props come.
Magicfloat is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.