![]() |
He's set on 18K and that boat is going to FIRMLY sit right where it is for a LOOOOONG time
|
This boat was for sale all last summer also.
|
Originally Posted by handfulz28
(Post 3516616)
Did he say whether it runs?
We all know the value is in the unique nostalgia. Even if you paid $15k and put another $20k into it, that's less than the depreciation hit you'd take on buying a newer boat. neat boat, but I agree it is going to sit there and rot until it is absolutely worthless, which it might be now. Brian |
looks worthless now
|
Originally Posted by befu
(Post 3516859)
I would be scared that $20k would be just the start. I understand the Kaama's are straight forward and standard parts, but the interior is probably scary, the engines of serious concern, and the stringers could be shoot sitting like that without a serious cover over it. A cheap blue tarp protecting that boat? Naw, you can get a running one for $30k +/- with better long term possibilities.
neat boat, but I agree it is going to sit there and rot until it is absolutely worthless, which it might be now. Brian |
I've looked at it. Its completely trashed. All the stringers in the engine compartment froze and split. The cabin is all ripped apart and has a sump pump in the floor. As you can imagine the vinyl is junk. I offered him $5,000 mainly for the trailer and some useable parts and he was dead set on $19,000 (thats what is was when I looked at it last fall) I called him a month ago seeing if he wanted to sell just the trailer and he said no because he is still waiting for the right buyer, I told him good luck
Its such a waste |
Originally Posted by Car Biz
(Post 3517279)
You need to come look at mine to see what thay are like:drink:
might be able to come up and look then depending on your schedule. Brian |
Originally Posted by befu
(Post 3517855)
what are you doing thursday evening or Friday (Morning/Afternoon)? Going to be in Hopkins again starting Thursday around dinner time.
might be able to come up and look then depending on your schedule. Brian Going out there Fri night to do some cleaning. I want to run it Sunday for one last time! Let me know! Jeremy |
Since this is a 311 thread, my 311 is MINT and just needs work on one motor(spun bearing) see add in swap shop... pm w/any intrest/questions
|
Nobody?
|
| All times are GMT -5. The time now is 09:50 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.