|
382 Grab Rail
Port side grad came loose on the port side. It appears one anchor point can be accessed in the V-berth and the other in the main cabin.
How much trouble is it to get to? |
Grab Rail bolts
You should be able to get to them except the one behind the fridge. I pitched my fridge so its accessable. The cabin speaker covers and speakers have to come down. Phillipps screwdriver (shortie). Through the speaker holes you can reach them, Do not overtighten, It will crack the gelcoat. The rears from the engine compartment, midship, pull the 6x9 speaker and reach up. I think they are 9/16 bolts. Good luck.
|
As Fossil Fuel stated.....I had my frig out 2-3 times over the years for running wires etc. so you can get in there if needed.
|
Originally Posted by fossil fuel
(Post 3531814)
You should be able to get to them except the one behind the fridge. I pitched my fridge so its accessable. The cabin speaker covers and speakers have to come down. Phillipps screwdriver (shortie). Through the speaker holes you can reach them, Do not overtighten, It will crack the gelcoat. The rears from the engine compartment, midship, pull the 6x9 speaker and reach up. I think they are 9/16 bolts. Good luck.
Originally Posted by t500hps
(Post 3531848)
As Fossil Fuel stated.....I had my frig out 2-3 times over the years for running wires etc. so you can get in there if needed.
|
| All times are GMT -5. The time now is 05:54 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.