Go Back  Offshoreonly.com > Owners Forum > Formula
382 Grab Rail >

382 Grab Rail

Notices
Formula

382 Grab Rail

Thread Tools
 
Old 10-19-2011 | 08:31 PM
  #1  
Thread Starter
Registered
20 Year Member
 
Joined: Feb 2006
Posts: 793
Likes: 59
From: Sandusky/Olmsted Falls, OH
Default 382 Grab Rail

Port side grad came loose on the port side. It appears one anchor point can be accessed in the V-berth and the other in the main cabin.

How much trouble is it to get to?
kjm5125 is offline  
Reply
Old 10-19-2011 | 08:48 PM
  #2  
Registered
15 Year Member
 
Joined: Dec 2007
Posts: 912
Likes: 57
From: Solana Beach,CA
Default Grab Rail bolts

You should be able to get to them except the one behind the fridge. I pitched my fridge so its accessable. The cabin speaker covers and speakers have to come down. Phillipps screwdriver (shortie). Through the speaker holes you can reach them, Do not overtighten, It will crack the gelcoat. The rears from the engine compartment, midship, pull the 6x9 speaker and reach up. I think they are 9/16 bolts. Good luck.
fossil fuel is offline  
Reply
Old 10-19-2011 | 09:28 PM
  #3  
t500hps's Avatar
21 and 42 footers
20 Year Member
Platinum Member
Super Moderators
 
Joined: Sep 2004
Posts: 8,207
Likes: 146
From: Richmond VA
Default

As Fossil Fuel stated.....I had my frig out 2-3 times over the years for running wires etc. so you can get in there if needed.
t500hps is offline  
Reply
Old 10-20-2011 | 09:20 PM
  #4  
Thread Starter
Registered
20 Year Member
 
Joined: Feb 2006
Posts: 793
Likes: 59
From: Sandusky/Olmsted Falls, OH
Default

Originally Posted by fossil fuel
You should be able to get to them except the one behind the fridge. I pitched my fridge so its accessable. The cabin speaker covers and speakers have to come down. Phillipps screwdriver (shortie). Through the speaker holes you can reach them, Do not overtighten, It will crack the gelcoat. The rears from the engine compartment, midship, pull the 6x9 speaker and reach up. I think they are 9/16 bolts. Good luck.
Originally Posted by t500hps
As Fossil Fuel stated.....I had my frig out 2-3 times over the years for running wires etc. so you can get in there if needed.
Thanks, the two I need to tighten are before the fridge. The one in the in the V-berth might be more effort.
kjm5125 is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.