1MOSES1

to the OP....we will be selling within the year to move up in size. here are some pictures:

4mulafastech

Good to hear you will be back on the water before the end of the season!

I was hoping to come on and see you start an upgrade thread...oh well..lol! I will have one eventually, but it is going to be a while...

88242LS

sweet, they only made a cpl of those with them graphics

Expensive Date

Starting to feel like Gino, about a mile from the ramp other engine starts getting hot. Shut it down make sure nothing is blocking the drive and then head back on one engine.

Get home pull seawater pump and have a bunch of blades gone. Change it with the wear plate then spend five hours removing every hose and flushing every hose. Ran it for 15 minutes on the hose seems fine. Try this again tomorrow.

Weird though that impeller was changed in the spring.

4mulafastech

That is weird. Where did you get the impeller? I've changed mine a couple times over the years and they have always been intact. I buy MerCruiser impellers through BAM.

Expensive Date

I got them from one of my customers,I sell tools so I stop at a few marinas they were in the bag but when I got home noticed the were six years old (the manufacture date is on the bag). The little voice in my head told me not to use them, but I did because they felt ok. Both sides are new now.

Ran it about 70 miles today, ran fine no overheating so I guess I got all the pieces.

Expensive Date

First picture is of the head, small hole by valve guide.
Second is of impeller.


It has not been a good two weeks.