how do I reset low drive fluid alarm?
#1
Thread Starter
Registered
Joined: Oct 2009
Posts: 74
Likes: 0
From: Slidell, LA
Recently purchased 353 with twin 525 efi's with bravo xr's, 196 hours. Got alarm--double beep every minute from port engine. Manual says alarm indicates low drive fluid. Added 1/4 quart drive fluid to port engine. Reservoir indicates "full". Boat has been driven three times since adding fluid, but alarm still sounds every minute. Does system need to be bled? How do I reset alarm?
#3
Thread Starter
Registered
Joined: Oct 2009
Posts: 74
Likes: 0
From: Slidell, LA
two beeps every 60 seconds at any rpm, neutral, forward, and reverse. fluid was def low, but has been topped off. The merc manual lists low drive lube as the only problem with two-beep alarm. My old 496 gave two beeps for three or four problems. Is the low drive lube sensor in the reservoir?
#6
two beeps every 60 seconds at any rpm, neutral, forward, and reverse. fluid was def low, but has been topped off. The merc manual lists low drive lube as the only problem with two-beep alarm. My old 496 gave two beeps for three or four problems. Is the low drive lube sensor in the reservoir?
On mine its in the bottle, on the bottom.



