What is the stock prop for 330hp B1 with 1:50 ratio?????
 

I was thinking that the stock prop for the 330HP B1 and 1:5 gear was a Miriage SS three blade 15 1/4 X 19P, right hand, is that right?

Tell me if I'm wrong because that is what I need a prop for.

Anyone have a prop laying around for this set up?

I am going to put stock power back in my 242SS. The prop was missing from the power package when I got there to pick it up and I sold the prop off my boat thinking I was going to stroke it up and use a larger wheel. Now that I have scrapped that idea I need the original prop back. :poopoo:

I have a Mirage Plus 23P in the swap shop if you are interested. It's been re-conditioned but looks pretty good. It's what I used before I raised my x-dimension. Similar hull, with the same motor/drive.

your gonna want a mirage 21

21 mirage plus will be what you want. 23 will be a little much for stock power.

I have a 19p mirage plus if your set on this prop I ran it with my 242 when it had the small block in it and alpha one, I ran a 23 plus with my bravo swap and 509 and currently run a 21 plus with my 454 with that has some where in the area of 365-400 hp.

Thanks but I don't think this 330hp will pull that wheel.
I heard some ran the 21. I'm not sure how to tell if that would work. This 242SS had a 19 when I got it.

I'm open for more pitch but 19 is what it had when I got it so I'm thinking to start there. What do you want for that 19?

if you pm me your email I can get some pictures to you by the weekend of the 19 plus. The 21 plus I run on the boat now really works nice I cruise at 30 mph at 3000 and have reached speeds of 62 mph at 4900 which is the max I can pull out of this motor all through gps speedo . Pretty much the same hull just different interior config....

Pm sent

Yep, the 21" is the one you want. Check out Formulaboatsforum.com.

Sweet. I replied over there too.