Does anyone have any pics of what the factory horns looked like and who the manufacturer was for the 1989 F357 SR1? The previous owner removed the horn and never replaced it. The mounting holes and wires are still there.

I don't remember the original manufacture was, but I took mine off and put a flush mount one in.

Well you see the mount position there on the port side where the wires are,that is where a stainless bracket held two round stainless can looking horns. I don't have a pic but I could email you one if you want.

+1

My 1987 242ss has the twin small can style, original

here is the stamped info on the original assy:
Afi
sea fit
a-24 12v

pics available if you need send me an email i can respond with pics.
Hope this helps you, have a great week.
Gary b.
Glenamy 242ss

The holes on my Port side look as though there were two mounting points. Pictures would be greatly appreciated.

I'll get the pic's tomorrow am, please send me your e-mail i always have problems posting pics on forums.
My horns are mounted but i will cover all angles i can,

...................

You have a PM. Thanks for your help.