Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Formula (https://www.offshoreonly.com/forums/formula-36/)
-   -   Just got done piping through the silent thunder platform (https://www.offshoreonly.com/forums/formula/327356-just-got-done-piping-through-silent-thunder-platform.html)

Mr Maine 06-15-2015 02:39 PM

Just got done piping through the silent thunder platform
 
I just got done piping through my platform. I think if you search "thru thunder" or similar there are threads where others have done it.

I enlarged my tips from the 3.5x4.5 to 5.5x4.5 inches so they now are nearly square and much larger looking. I then used 4inch stainless pipe and rubber exhaust hose and piped from the tip on the transom to the newer larger square tip on the platform. I used a flange that bolts to the square tip from inside the platform and this is where the transformation from the round 4 inch pipe to the square tip occurs. I cut and welded 45 degree angle elbows to make the offsets.

Externally the only difference is the larger tip, but it is now straight thru exhaust. It is much louder now, and somewhat louder in the boat.

The job was a pain but I wanted to keep the factory platform and have true thru hull exhaust so it was worth it to me.

donzi matt 06-15-2015 02:48 PM

Pictures please!

Mr Maine 06-15-2015 04:06 PM

I have some pics but can't post as I'm not a paying member.

Jonesyfxr 06-15-2015 04:36 PM

I believe if you have a Photobucket account you can post pictures.

donzi matt 06-15-2015 04:47 PM

Or email them to me and I will post them for you. PM me if you want my email address.

86242ls 06-15-2015 05:39 PM

No need to waste your money on a message forum, post to photbucket then embed the picture here

donzi matt 06-15-2015 05:40 PM

4 Attachment(s)
Here are the pictures Jeremy sent me, what a cool project. I miss that boat.

[ATTACH=CONFIG]542158[/ATTACH][ATTACH=CONFIG]542159[/ATTACH][ATTACH=CONFIG]542160[/ATTACH][ATTACH=CONFIG]542161[/ATTACH]

Mr Maine 06-15-2015 06:08 PM

Thanks for posting those DM, next is external steering but I'm going to clean her up and drive her for now.

Jonesyfxr 06-15-2015 06:43 PM

Looks nice!! Where'd you get the rubber exhaust tubing from?

Mr Maine 06-15-2015 08:22 PM


Originally Posted by Jonesyfxr (Post 4317980)
Looks nice!! Where'd you get the rubber exhaust tubing from?

It is just common 4 inch exhaust hose. I got it from Hamilton marine.

payuppsucker 06-16-2015 08:45 AM

Nice job MM. Wasn't aware you had Matt's former boat, now I know.

masi242 06-16-2015 08:45 PM

3 Attachment(s)
Nice job did mine a few years ago gives a little more rumble[ATTACH=CONFIG]542203[/ATTACH][ATTACH=CONFIG]542204[/ATTACH][ATTACH=CONFIG]542205[/ATTACH]

Mr Maine 06-17-2015 07:11 AM


Originally Posted by masi242 (Post 4318590)
Nice job did mine a few years ago gives a little more rumble[ATTACH=CONFIG]542203[/ATTACH][ATTACH=CONFIG]542204[/ATTACH][ATTACH=CONFIG]542205[/ATTACH]

masi, I remember seeing yours now. A little different with a single but looks like it came out good.

Car Biz 06-20-2015 12:19 PM

NICE JOB!!!! I did the same to my 272

fastninja 06-21-2015 01:12 PM

how about some audio

Mr Maine 06-21-2015 09:56 PM

I'll try to post some up. It is much louder, much louder haha. Behind it is basically deafening haha

Mohawk242 07-25-2015 09:21 PM

Some videos of Mr Maine's 311.

Before https://youtu.be/Jts89eGJTwE
After https://youtu.be/M5T1L8dwZKc
Idle https://youtu.be/e0hQpAAZbKA

Car Biz 07-27-2015 08:24 AM


Originally Posted by Mohawk242 (Post 4334119)

Nice!!!!

donzi matt 07-27-2015 08:49 AM

Holy chit that thing is loud now. Sounds great and it is good to see the old girl getting worked out proper!


All times are GMT -5. The time now is 11:49 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.