Go Back  Offshoreonly.com > Owners Forum > Formula
Cabin Lights >

Cabin Lights

Notices
Formula

Cabin Lights

Thread Tools
 
Old 06-22-2015 | 09:39 PM
  #1  
CBlakeNS's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Nov 2003
Posts: 1,959
Likes: 12
From: Williamsburg, VA
Default Cabin Lights

So I haven't spent much time looking at these but I assume the bulbs need replacing. How do you take the cover off the center lights that run down the cabin? I also have 1 round light by my sink. Sorry- I don't have pictures. I figured the covers would just pop off but didn't get much time to look because so hot in storage.
CBlakeNS is offline  
Reply
Old 06-23-2015 | 06:25 AM
  #2  
Registered
 
Joined: Mar 2006
Posts: 409
Likes: 1
From: Navarre, FL
Default

If they are anything like mine the cover should turn about a 1/4 turn and pop off.
alindquist is offline  
Reply
Old 06-23-2015 | 07:34 AM
  #3  
VoodooRob's Avatar
VIP Member
10 Year Member
VIP Member
 
Joined: Jul 2011
Posts: 1,992
Likes: 48
From: Cleveland Ohio
Default

Originally Posted by alindquist
If they are anything like mine the cover should turn about a 1/4 turn and pop off.
^^ This and replace the bulbs with LED. The heat that is given off from the stock bulbs is insane. Just did my whole cabin for $8 in LED bulbs off flea bay.
VoodooRob is offline  
Reply
Old 06-23-2015 | 11:59 AM
  #4  
CBlakeNS's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Nov 2003
Posts: 1,959
Likes: 12
From: Williamsburg, VA
Default

That's for circular light. What about the rectangle one in center of cabin.
CBlakeNS is offline  
Reply
Old 06-23-2015 | 12:25 PM
  #5  
VoodooRob's Avatar
VIP Member
10 Year Member
VIP Member
 
Joined: Jul 2011
Posts: 1,992
Likes: 48
From: Cleveland Ohio
Default

Sorry cant help, I have the small circular lights going down the center as well as the sides. If anything call Formula directly
VoodooRob is offline  
Reply
Old 06-23-2015 | 10:21 PM
  #6  
Registered
 
Joined: Jul 2010
Posts: 495
Likes: 0
From: Jersey Shore
Default

Old school rectange with black ends switch on each side and clear lens in center? If so.... squeeze the lens in center and it comes out.

I updated the bulbs to leds in mine from superbrightleds.com. You can see in pic the housings sorry i do not have a direct shot of them.




Last edited by I.D.C.E.; 06-23-2015 at 10:27 PM.
I.D.C.E. is offline  
Reply
Old 06-24-2015 | 09:34 AM
  #7  
CBlakeNS's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Nov 2003
Posts: 1,959
Likes: 12
From: Williamsburg, VA
Default

Yes - they are similar housings. I will try that!
CBlakeNS is offline  
Reply
Old 06-24-2015 | 04:51 PM
  #8  
ninetym's Avatar
Registered
 
Joined: Dec 2004
Posts: 199
Likes: 1
From: East China MI
Default

Does anyone know where to buy the unit? Preferrably an LED fixture?
ninetym is offline  
Reply
Old 06-25-2015 | 10:02 AM
  #9  
CBlakeNS's Avatar
Thread Starter
Registered
20 Year Member
 
Joined: Nov 2003
Posts: 1,959
Likes: 12
From: Williamsburg, VA
Default

LEDs ordered. Man the covers were a pain to pop off.
CBlakeNS is offline  
Reply
Old 07-07-2015 | 04:03 PM
  #10  
Registered
 
Joined: May 2015
Posts: 27
Likes: 0
From: Houston, Texas
Default

I need to change mine to LEDs as well but Ive had a hard time finding the correct bulb numbers to order without trial and error. Mine are unreadable.
Mine are like I.D.C.E has. Do you guys have any bulb numbers that would help?
Reaper311 is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.