“Lake effect” cleveland Ohio, my best friend 107 was best, 509’s pro charged with box stock Gm perfomance edelbrock heads, 7lb boost

boat is fast.. https://cimg2.ibsrv.net/gimg/www.off...392691778.jpeg
https://cimg3.ibsrv.net/gimg/www.off...1655553b8.jpeg
https://cimg4.ibsrv.net/gimg/www.off...db097819b.jpeg

Years ago I bought a 382 with 8PSI Procharged 500efis/XR drives......ran a best of 98 mph.

https://cimg2.ibsrv.net/gimg/www.off...0dfd5fbac.jpeg
So far, takes a lot of gas to get there with near perfect conditions. From 3 years ago and only attempt at top speed. Arneson and 750x2

That's getting it done!!

https://cimg5.ibsrv.net/gimg/www.off...bb9b68346.jpeg
https://cimg3.ibsrv.net/gimg/www.off...116964b97.jpeg

how do you like the drives? How do they handle around the dock? Install and setup pretty straightforward? I’m interested. Thx

My Arneson drives have been a solid performer. Bravo XR's were a big problem, even with original power. You'll gain top end speed. No docking issues, just different. With my install, we did have to move the motors 3" forward. I used a local shop and they worked with Rik on the install.

Nice set up. I was Real close to pulling the trigger on Arnesons after I ate several sets of XRs. Talked to Rik a few times.
Decided on SCXs mostly because of the cut yo AzZ in the water when swimming if not really careful.
Not that Drunks are not careful. :lolhit: and don't forget the Rooooosttt!!
Close to 800HP on my punched out 575's.

They look great. Is this a 382? Did you pickup any speed over the Bravos?

382 Pokerrun with a Kevlar hull. Picked up around 4mph over XR’s