If the breakers toggle and stay in position, they should be good.

These things are very delicate. The circuit breaker uses a black plastic covering that holds the toggle in place. The cover can become very brittle and break at the raised boss that fits in the hole on the helm. The breakers are fit together as an assembly per row. If you take them apart, do so very gently so as to not break the coverings. The circuit breakers almost never go bad... it's the covering and the mechanism that holds the toggle in place that goes.

If you can carefully remove the breakers, you might be able to clean up the toggles with a plastic-safe cleaner. Regardless, they should be visible at night.

Get more pictures!!!

Does this sealed beam light come out of this plastic housing?

http://i604.photobucket.com/albums/t...218_111723.jpg

I believe you have to replace the whole thing. I know some guys have replaced them with LEDs.

Bolt in or have to replace the housing on the hull as well?

Here is the switch panel. Only 1 that doesn't stay lit. It lights until another switch is thrown.
http://i604.photobucket.com/albums/t...218_112033.jpg

Dash lights

http://i604.photobucket.com/albums/t...218_112331.jpg

Couple more random pictures while I'm out here.

http://i604.photobucket.com/albums/t...218_110056.jpg

http://i604.photobucket.com/albums/t...218_112523.jpg

http://i604.photobucket.com/albums/t...218_112514.jpg

http://i604.photobucket.com/albums/t...218_113153.jpg

Figured it couldn't hurt so I decided to get them apart.

http://i604.photobucket.com/albums/t...218_113741.jpg

http://i604.photobucket.com/albums/t...218_113838.jpg

http://i604.photobucket.com/albums/t...218_113849.jpg

http://i604.photobucket.com/albums/t...218_114300.jpg

http://i604.photobucket.com/albums/t...218_114227.jpg

http://i604.photobucket.com/albums/t...218_114300.jpg

http://i604.photobucket.com/albums/t...218_114317.jpg

I played around at oriellys ctossing part numbers and played with google to find a 4.5" 100w spot rather than flood. Sylvania part# 4509. $12 each and they had 18 at rhe warehouse just a few miles down the street. Returned home poked that one back together. Did the same to the other side.

Original flood on left new spot on right.
http://i604.photobucket.com/albums/t...218_131601.jpg

http://i604.photobucket.com/albums/t...218_131936.jpg

http://i604.photobucket.com/albums/t...218_152724.jpg

http://i604.photobucket.com/albums/t...218_153441.jpg

Tom I like what you did with your switch panel. I could make something really trick looking to replace my entire panel but I really like to keep little things like this as factory as possible. I may add the blue switches later but for now I'll let these eat

I saw some people have found the bulbs at Home Depot if no luck at O'Rilley's

With the docking lights finished I moved on to the interior lights. Only the ones in the ceiling worked. Found that the mood lights in the floor were just unplugged from the rocker switch. Then found there were some lights behind the little couches that weren't working. They were also unplugged.

http://i604.photobucket.com/albums/t...218_153259.jpg

http://i604.photobucket.com/albums/t...218_153232.jpg