![]() |
It definitely would. Your absolutely correct. If I do end up having to dive deep into the pocket book I'll be getting a callies crank. Friends in the drag racing game have had very good experiences with them. Like you said, maybe a refresh and roll
|
Got in there last night. Found it to be #8 rod bearing. Everything else looks great. Being as I really don't have time to built it right now I opted to spend the funds on a 509 that sick stinger has for sale on the swap shop. Hopefully it can make it next week so I can break it in.
|
3 Attachment(s)
Engine got here yesterday and I took it up to my friends shop.
Got my carb and throttle bracket swapped, most accessory brackets on, harness swapped, headers off. Today I plan to get my exhaust on, new plugs in, prime oil pump and put dizzy back in. Attachment 569766 Attachment 569767 Attachment 569768 |
Nice!!
I think you're going to need a new prop! |
.030 over JE pistons, 1.7 crane gold rockers, crane cam shaft(I'll post card later), team g high rise weiand intake, now my holley 800 but was an 850 on it, 088 heads. Should be about 600hp maybe a few extra once tuned correctly. It's supposed to be a fresh built engine that sat for the last few years fogged. It bars over nicely, bore scope showed nothing but good signs. We will see soon. I am making some 1" spacers to put afr sender in to go between manifold and risers. Not sure when it will get into the boat but hopefully soon.
|
Are you going to use the headers?
And regarding a prop.. I have a 28P Bravo that was at some point labbed by BBlades. I'm thinking she'll go 78 or so with the right prop. Better get steering and k-planes! |
No I am not going to use the headers. I would have to get a couple of 90s, some tubing and more stuff so I'm going to keep my exhaust and sell those. I'll see how it does with the 23 m+. Don't know if she will have enough azz to twist a 28 but we will see.
|
1 Attachment(s)
A little progress. Plugs are in and gapped at.035, heads and manifolds cleaned and on with new felpro steel/composite gaskets, wires connected, ps pump and alt back on, belts go on tomorrow and I plan to take it home and drop in Friday night or sat morning.
Attachment 569772 |
1 Attachment(s)
She's in her little home. Just dropped in real quick this morning. Plan on finishing up this week in the evenings.
Attachment 569861 |
I love a happy ending!
|
| All times are GMT -5. The time now is 09:28 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.