Offshoreonly.com - Livorsi vs Autometer or Gaffrig Gagues

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Formula (https://www.offshoreonly.com/forums/formula-36/)

- - Livorsi vs Autometer or Gaffrig Gagues (https://www.offshoreonly.com/forums/formula/350273-livorsi-vs-autometer-gaffrig-gagues.html)

waveryd

10-15-2017 11:55 PM

Replaced Gaffrigs in a '98 382 with Autometer ProComp Marine and GPS speedo. Very happy with quality and performance. Solved lots of problems with erratic readings, bouncing needles, etc.

LS1	10-16-2017 02:32 PM

Quote:

Originally Posted by formula1 (Post 4588144)

Anyone know off hand what size the 311, tachs, speedo and smaller gauges holes are?

Usually 3-3/8" on tach and speedo and all other gauges 2-1/16"

Wally

10-16-2017 03:12 PM

Quote:

Originally Posted by boatnt (Post 4588148)

also think the guy that sells them is a member here

Yep goes by SSComp

masi242

10-16-2017 08:57 PM

I wasn't sure these guages were still around i bought some for my Dads boat years ago and still working fine, might be a nice upgrade for the spring. Is it that simple just wire them up.

TomZ	10-17-2017 08:18 AM

I like the SS gauges for non-performance applications only because there seems to be limited availability. Oil temperature and water pressure would be needed to make these more attractive for a performance boater. I have not seen these available on the eBay store.

All times are GMT -5. The time now is 11:24 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page