382 Fastech Imco SCX 2x900hp prop ideas
10-21-2018 | 08:11 AM
#21
VIP Member
Joined: Jul 2011
Posts: 1,992
Likes: 48
From: Cleveland Ohio
Assume props are stock full diameter with diffuser. Have a 1/4" taken off and leading edges sharpened. You need to get into your usable rpm before making major changes. Maximus is a thick heavy prop out of the box. The most helpful mod would be extension boxes or ITS once you get rpm up and a baseline established. Fastech hulls respond well to boxes.
10-21-2018 | 08:34 AM
#22
Thread Starter
Registered
Joined: Apr 2010
Posts: 25
Likes: 0
Assume props are stock full diameter with diffuser. Have a 1/4" taken off and leading edges sharpened. You need to get into your usable rpm before making major changes. Maximus is a thick heavy prop out of the box. The most helpful mod would be extension boxes or ITS once you get rpm up and a baseline established. Fastech hulls respond well to boxes.
02-07-2019 | 04:56 PM
#25
Registered
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
Looking at used Arneson Asd7m's .... 25K without Transmissions .....even 25K with Trans ... maybe 3-5K in new parts .....10K for props ..... whew ..... If you pay someone for the install was told 200 hours ....... if you go all new add 25k .........m
02-09-2019 | 03:11 PM
#26
arneson-industries.com
Joined: Jan 2001
Posts: 2,782
Likes: 7
From: California
200 hrs to install the drives is just wrong. The installation of the Arneson part itself is less than 3 hrs. Just gotta drill 10 stud holes and the stand-off box is on the transom.
How long it takes to remove and install engines?
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
