I have an early 2000's Eagle trailer which was built for a 33 SS which I am trying to use for my 94 336 SR1. The outer bunks sit right under the 2 set of chines (from the outside). Does anyone out there have an Eagle trailer for there 336 SR1 that could take some measurements of the height and spacing of the bunks and forward to me so I can mock the trailer I have?

I am located on Lake St.Clair in MI and could come to you if you are near.

Any help is greatly appreciated.

Wagz

Reach out to Formula Factory and they may provide drawings of the hull with angles and distances listed.

Before you make any cuts, can you provide pictures and measurements of your trailer bunks sized for the 33ss? I'm actually trying to adjust one of my trailers to fit a 330SS myself and they provided that info on the 330SS, but did not offer up where to place the bunks to best support the hull. Thanks, and if so I can provide my email in a PM to you.

I am located in Holland Michigan
1995 336
will be cutting all new upright stock for my trailer after labor day as the plates and uprights are rusting at the bunks
I can get some pics and/measurements or you are welcome to a road trip (3 hours)
rambunctious
Rob

Eagle Trailer by the way, just twhat you are lookign for