Getting it ready
The following 5 users liked this post by oconnor marine:
hoodoo (06-04-2020), J-Bonz (06-04-2020), Ratty206ls (06-04-2020), Sydwayz (06-03-2020), TomZ (06-04-2020)
The following users liked this post:
oconnor marine (06-04-2020)
#5
lets see a photo of your boat!!
Mine was ordered with the mercruiser racing 4 bolt main small blocks 320 mp efi motors EMI exhaust and bravo drives. revs at 5300 rpms about 69...mph gps.
Mine was ordered with the mercruiser racing 4 bolt main small blocks 320 mp efi motors EMI exhaust and bravo drives. revs at 5300 rpms about 69...mph gps.
The following users liked this post:
GLENAMY 242SS (06-04-2020)
#6
Registered
Mine is a 1989 272 sr1. Its been going thru what seems like a forever upgrade. It's a bravo boat. Upgrades have included is rebuilt bravos, new hd transom assemblies, bored and stroked 454's to 489's. its been three years since I've had it in the water due to trusting people to work on it that I never should have.
The following 4 users liked this post by Smoke eater:
#10
Registered
The following users liked this post:
oconnor marine (06-04-2020)